iBG iLog Strain Gauge/Bridge Data Logger
The iLog Strain Gauge/Bridge is low cost, high accuracy, battery powered, stand-alone data logger records the Strain Gauge/Bridge signals. Data are stored in 4MB non-volatile flash memory for later retrieval.
The logger supports 6-wire full bridge configuration by providing excitation power and excitation wire compensation for most accurate requirement.
It offers wide input range selections suitable for applications such as strain gauge, load cell and pressure sensor etc.
Its aluminum enclosure makes it excellent in the harshest industrial environment. Plug & Play USB port and versatile custom equation simplify communications and engineering unit conversion.
16-bit ADC makes it well suited for science and laboratory applications where precise and accurate measurements are critical.
Simply plug the logger to USB port of PC, the software automatically recognizes it, making it extremely easy to configure, download and view the plot.
- 16-bit analog-to-digital converter
- 4 megabyte memory size
- Both USB and serial interfaces with auto baud rate of up to 115200 bps
- Over 10 years of battery life
- Powerful software for configuration, downloading, plotting, analysis and alarm reporting
- Configurable alarm controls/excitation controls
- Wide sampling interval selections (30 milliseconds to 12 hours)
- Rugged aluminum enclosure
|Product Name||iLOG Strain Gauge/Bridge data logger|
|Model||iBG-8, iBG-16, iBG-32|
|Connection||Pluggaable terminal block for:
Excitation voltage output (2.5 VDC, max load current: 5mA)
Excitation sense input (2.5 VDC)
Alarm and excitation control outputs
|Channels||One excitation sense 2.5 VDC channel.
One bridge input channel:
iBG-8: ± 8mV
iBG-16: ± 16mV
iBG-32: ± 32mV
|Accuracy||± 0.2% FSR @ 25°C for iBG-8
± 0.1% FSR @ 25°C for iBG-16
± 0.05% FSR @ 25°C for iBG-32
|Input Impedance||< 1OHms|
|Over-Current Protection||Up to ± 100 mA|
|Overvoltage Protection\||Up to -3VDC ~ +40VDC|
|Channel Alarms||Two editable alarm thresholds per channel.|
|Alarm Indicator||On-board LED becomes red when in alarm condition.|
|Size||4 Mega bytes (2MB readings).|
|Data Retention||Over 20 years.|
|Sampling Interval||1 second to 12 hours user selectable.|
|Logging Mode||Stop recording or FIFO when memory is full.|
|Logging Activation||Programmable instant, start delay or field push button activation.|
|Interface||USB (Mini-USB-B) (USB-A-mini USB-B Cable included)
AUX(RJ11) for direct TTL level communications
|Baud Rate||Auto-detect baud rate from 2400 to 115200 bps on both USB and AUX.|
|Power||Built-in 3.6V Lithium Battery.|
|Battery Life||12 years based on 1 minute sampling interval in stand-alone mode.|
|SiteView (Sold separately)||Configuration, downloading, plotting, real-time view, custom calibration and custom equation.|
|Software Requirement||Computer with 1.0 GHz or faster processor
1 GB Memory or higher
10 GB of available hard-drive space or higher
Windows XP with SP2 or later, Vista, Window 7,8,10
At least one USB port or one COM port.
|Dimension||88 X 64.2 X 24 mm (3.46 X 2.53 X 0.95 inches).|
|Mounting||Probe/wall-mount holes for hanging/mounting.|
|LED Indicator||Tri-Color LED: (can be disabled for power saving)
Normal Sampling: light green when sampling.
Alarm: red when sampling.
Low Battery: amber when sampling.
|Operating Environment||-40 ~ +70 °C (-40 °F ~ 158 °F), 0 ~ 95% RH non-condensing.|
|Clock Accuracy||±1 mintue per month.|
Logger Memory Capacity
|Sampling Interval||Logging Capacity|
|1 minute||2 years|
|10 seconds||121 days|
|1 second||12 days|